GW Portal A modern wizard in everyday's life.


LED Plasma Board – Analyze All Solutions Any Time You Are Examining Deciding On LCD Plasma Boards.

So that your considering acquiring a flat screen (or you currently have) and from now on wish to explore the rewards to LED Plasma Board it to the wall. Each of the terminology and acronyms can be overwhelming at first however i will do my wise to explain what you should know. In the event you already own a flat screen it is possible to skip over Step One.

It really is safe to say your interested in a higher definition television (HDTV). When your seeking a traditional cathode ray tube (CRT) television you have to look elsewhere, these are a dying breed and will not be covered in the following paragraphs. HDTV's can be found in number of types, the most important players being LCD's, plasmas, rear projections and front projections. LCD stands for Liquid Crystal Display, it is far from essential to understand what that is, just know this is basically the same technology that is behind the lcd computer monitors you can see everywhere. The main focus of this post will be on LCD's and plasmas as they are considered flat panels and can be easily mounted towards the wall through commonly available mounts.

Permit me to squash a typical misconception at the moment. LCD technology made a great progress way and from now on makes a picture that is certainly very similar to plasma screens. For that purpose of mounting I can tell you some of the differences between LCD and plasma. LCD televisions are typically likely to be lighter with regard to their respective size than plasma screens. This may cause mounting a little easier and less expensive, as you may not want a mount which is rated for higher weight capacities. You possibly will not must reinforce the mounts insertion point in your wall either. LCD's can also be much easier to transport in case there is a move, plasma screens are notorious for cracking/crushing under their very own weight when they are not transported properly.

For those of you which can be mindful of "becoming environmentally friendly" or saving cash in your electrical bill, consider LCD's as they consume a lot less power per respective size than plasma screens. There are numerous other differences in specifications and performance between LCD and plasma but none that are applicable to mounting. The average consumer/enthusiast would be unable to differentiate, personally I gravitate towards LCD screens. Hopefully now you must a sense of which television type you may be picking and will go on to step two.

Just about the most commonly asked questions is really what size TV to get. Choosing the proper TV size is essential and must not be overlooked. Whenever discussing the screen size remember televisions are measured diagonally (bottom left corner to upper right corner). This assumption ought to always be made when measuring unless specifically stated otherwise. The largest factor is just how far the majority of viewers will probably be through the screen. Take into account that after mounting your television virtually all screens will sit about 3 inches away from the wall. Measure just how far your seating comes from the wall you plan to mount your screen to. Add 3 inches to the estimate to look at the mount that will sit involving the wall as well as your screen. The normal rule for HDTV's will be the viewer wants to be approximately 1.5 - three times the distance in TV size (inches) from your screen. Translation: Should your television is 36 the viewer ought to be sitting at least of 54 inches in the screen as well as a maximum of 108 inches. You may not need to be too close to a HDTV screen because they are created to be viewed from certain distances. Sitting too close can make you question your HDTV image quality and in addition lead to some serious eye strain. If you sit too much from your screen your eyes cannot appreciate the quantity of detail because they will not be able to resolve the entire resolution in the screen. Sitting too much will likely sacrifice the "immersion" feeling your HDTV screen is supposed to provide. I highly suggest sitting somewhere in the middle of the recommended viewing range. This should actually be ample sizing information for virtually any home video/audio enthusiast.

Step 3: How you can choose the proper TV mount? Things considered

Picking out the proper TV mount will not be difficult in any way. There are several different styles around to choose from. The 1st kind of mount I am going to discuss are definitely the Low Profile TV Mounts, they are also referred to as flat mounts or flush mounts. These mounts have zero range of motion and hold your television screen about 1 inch through the wall. These are perfect for folks that are seeking a very low profile and sleek search for their HDTV screen. These mounts could keep your television flush to wall and reduce wasted space in tight areas or small rooms. It is important to note, with Low Profile TV Mounts, you will likely must remove the TV in the mount to attach/detach cables.

The following kind of mount may be the Tilt TV Mount. Tilt mounts do exactly what the name implies, they enable the screen to pitch downward for situations that you want the screen mounted beyond viewing level around the wall. Instances of when these mounts come in useful are retailers, board rooms or bedrooms for when you need a great viewing angle while lying down. Different types have varied ranges of motion, the normal mount provides 15 to 20 levels of tilt, usually ample to satisfy people's needs. Mounts with further tilt can be purchased, it is important to examine the specifications prior to buying.

The 3rd and final mount to be discussed will be the Swivel TV Mount, also called articulating mounts or cantilever mounts. Swivel mounts have the ability to extend the television away from the wall and rotate the screen in both direction. The common swivel mount can allow the TV to stay from 5 to 20 inches from wall and rotate approximately 60 degrees either in direction. Most swivel mounts also permit around 15 - 20 levels of tilt much like a Tilt Mount. I strongly recommend Swivel Mounts for people who want probably the most flexibility and customization of optimal viewing angles. They are good for those who require maximum adjustability in their Flat Screen TV. Tilt and Swivel Mounts will also be suitable for those constantly connecting different wires to the TV as they allow some work room behind the screen.

Now that you have got a design of mount in your mind you need to look at the size screen. When purchasing a mount you will notice they can accommodate an array of TV sizes. How is it so? Most mountable HDTV's comply with agreed specifications set through the Video Electronics Standards Association or even more popularly known as VESA. VESA refers mostly towards the hole mounting pattern on the TV and mount. Most mounts and TV's will conform to this standard but be sure you verify before purchasing. Imagine if you already obtained a television that may be not VESA compatible? No issue! There are lots of commercially available adapter plates which let you mount your television to VESA compatible mounts. What does this mean you may ask? Basically, TV's of many sizes will have the same hole configuration in the rear of the screen to produce finding and installing a mount as painless as possible.

The weight of your respective TV is also important. The weight of your screen can mostly be based in the instruction manual or about the box, sometimes it could also be located on the rear from the screen. If everything else fails it should be on the manufacturers website. When searching for mounts they are going to usually give you a maximum weight they can safely accommodate. Usually do not EVER exceed the most recommended weight! Worst case scenario your screen rips out of the wall and falls on the floor bringing you a broken TV and holes within your wall. If your TV is within 20 pounds from the maximum weight I always recommend going with LCD Plasma Board having a higher weight rating. The maximum weight guidelines usually do not take into account the weight of the wires connected to the back of the TV screen. The weight or tension of the wires is not really negligible! Most people have between 2 to 14 wires plugged into the back of your screen, this additional load adds up. Will not forget people may be inclined to touch or lean on the screen, you even exert force when tilting/swiveling it completely to another position. When your within 20 pounds from the maximum weight consider receiving the beefier mount, any additional few bucks spent here may help save hundreds over time.

This article is only to be utilized being a general guide, always follow supplied instructions. When deciding how high to mount your TV, the very best viewing angle is usually straight on (eye level). If you decide to draw a horizontal line across the center of your TV (don't actually draw a line in your screen), this line should match the eye level of your viewers. With regards to Tilt Mounts, you are able to mount the screen even higher and tilt the screen to compensate for the height. The initial step must be to identify an area of wall appropriate for the mount. I never recommend installing TV mounts into drywall alone, whatever the weight! Drywall cannot keep the weight of your screen and can easily break causing your set to fall for the floor. Your best option would be to identify a stud (wooden beam) behind the drywall that you can screw into. Mounts can be installed into brick and concrete, these installs are rather simple as you may not need to worry about finding studs, the brick/concrete is sturdy enough by itself to keep the load. Make sure your mounting hardware penetrates in the stud. When your home/office utilizes metal framework as opposed to wooden studs, I would recommend commonly available toggle bolts. They could be bought at a local hardware store or online. Environmental factors is highly recommended too. There has been a recent trend to hanging flatscreens above the fireplace. While this looks nice, the temperature fluctuations have demostrated to reduce TV performance and even to damage the screen. It might be done however, but first verify the wall/chimney on top of the fireplace does not have temperature fluctuations of over 20 degrees Fahrenheit. Trace levels of smoke may also result in discoloration as time passes. The exact same thing is true of baseboard heat and radiators. Make sure the TV is significantly enough away that it must be not subject to extreme temperature fluctuations.

The very last step before drilling is to pencil the mounting holes in the wall. You need to make absolutely sure they can be level. Use a wall level or simply just compare from your floor and make sure the distances are equal. Make time to perform the measurements now, an un-level installation will result in a crooked TV, no good! This is very difficult to correct and detrimental to your dry wall as you will have to re-screw. In the same way dad always said, "measure twice, drill once." If you are not "hardware/construction" savvy or acquainted with the building of your property, you should consider investing in a stud finder. Most Stud finders will identify metal and wood beams you are able to anchor into, usually the one I featured may also indicate the inclusion of live electrical wiring. Never drill right into a wall in case you are unsure whether there may be live electrical wiring or plumbing behind it! Should you be unsure, confused or perhaps not very confident at this time Make sure you spend the funds with a professional installation. They can be done rather cheaply and most companies do really good work. For inexperienced people, the fee for the drill, wall level as well as other tools may be more expensive compared to a professional installation. If I convinced you on an experienced installer I can recommend among the best. ArmorMount offers an excellent on-site installation service. I actually have used them myself and have only great what you should say. Visit ArmorMount's website directly for info about ArmorMount's installation service, I provided a link below.

There a many websites to pick from. Having done a variety of installations I could personally recommend one website that is truly great. offers these three mounts I spoke about earlier. They could supply mounts for pretty much every size, weight and make of television. What I really like relating to this clients are their LCD Plasma Board. Around the main screen from the website you merely enter your TV logo and the screen size, the site instantaneously displays the numerous style mounts you can decide on. They provide every one of the hardware (nuts and bolts) you will need to the installation. Their install kits come prepared to accommodate drywall, brick and concrete installations. You might also need a choice of adding their professional installation service I mentioned earlier (strongly recommended for the rookie handyman). Furthermore, i find their pricing to get highly competitive, they consistently supply the lowest prices and then sell quality products. They also advertise free freight plus a 6ft HDMI cable with every purchase. If you had the pleasure of looking for HDMI cables recently you are going to agree they can be very expensive and the things i consider to become probably the most overpriced item of your home entertainment setup. HDMI cables are rather convenient however, they carry both HDTV video and digital sound around 1080P. They potentially eliminate up to five separate cables (3 Component Video / 2 RCA Audio). ArmorMount also provides friendly customer support representatives that i plasmma to be very informative and quite pleasant.

I hope you found the following information informative. Remember to always consult an experienced when you are unsure regarding an installation and try to make reference to your instructions/specifications for the final say.

Comments (0) Trackbacks (0)

No comments yet.

Leave a comment

No trackbacks yet.